Material:
Impact and chemical resistant Engineering Polymer resin; High-performance, anti-static, thermoplastic material resistant to chemicals and solvents; o-ring sealed and vented.
Dims/Weight Length: 7.00 in. (17.78 cm); Body thickness: 1.05 in. (2.67 cm); Width: 1.50 in. (3.81 cm); Face cap diameter: 1.93 in. (4.90 cm)
7.5 oz (213 grams) with batteries (included with purchase)
Light Source C4® LED technology, shock-proof with a 50,000 hour lifetime. Smooth parabolic reflector produces a tight beam with optimum peripheral illumination. Regulated run time provides consistent performance throughout battery life
Switch Push-button tail switch. Sealed switch design protects it from corrosion caused by battery leakage
Battery
3 AA alkaline batteries reduce battery and recycling costs by 25%
Combination of visual and mechanical polarity protection ensures correct installation of batteries
Light designed to not power on if batteries are installed incorrectly
Features
Captured locking set screw will not back out - prevents FOD (Foreign Object Debris)
Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw
One body electronic LED module mechanically attached to electronic assembly
O-ring sealed, dust-proof, water-tight enclosure; IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes; IPX4 for water spray
3 meter impact resistance tested
Ergonomically designed for maximum hand comfort
Helmet Mount:
The Firefighter s Streamlight helmet flashlight mount, used in conjunction with Streamlight s 3AA ProPolymer HAZ-LO series or 4AA ProPolymer series of flashlights, offers a hands-free lighting solution. The durable, lightweight, aluminum mount attaches easily to the brim of firefighter s helmets with no tools required.
Rubber Helmet Strap:
The rubber helmet strap, used in conjunction with Streamlight s 3AA ProPolymer HAZ-LO series or 4AA ProPolymer series of flashlights, offers low profile, hands-free lighting. It is a quick and easy, no tools required method to attach your 3AA/4AA flashlight to almost any helmet. Made of engineered high-strength rubber. Also fits hard hats.
Approvals
C-UL-US Classified Class I, Division 1, Groups A,B,C,D; Class II, Division 1, Groups E,F,G; Class III; Exia; Temperature Code T4 Most models meet applicable European Community Directives
