Para-Tek FR™ is PGI’s proprietary Tri-Blend that leverages the benefits of three fibers – High Strength Para-Aramid, Lenzing FR®, and High Tenacity Nylon. The end result is a lightweight, breathable hood that offers exceptional flame and heat resistance and the highest arc rating – 34.4 (Level 3), ounce per ounce of any hood on the market. When tested for vertical char length the Para-Tek FR fabric had the lowest char lengths we’ve ever seen averaging 9mm (.36”) in the wales direction and 12mm (.48”) in the courses direction after five launderings. For comparison purposes, 100% Nomex has more than four times longer char lengths in the wales direction and over three times longer char lengths in the courses direction. Thermal Protective Performance (TPP) results were equally impressive with a TPP rating of 34.8 after five washings. Only the PBI/Lenzing FR blend with our Comfort Plus™ liner – 38 TPP rating, had a better rating
Para-Tek FR include:
- Inherently flame resistant
- Low thermal shrinkage
- Excellent TPP rating – 34.8 after five washings
- Superb flame resistance – lowest vertical char lengths of all hood fabrics
- Excellent Arc Flash protection (Highest arc rating of all hood fabrics) –
- ATPV = 34.4 HRC 3 (On double ply hoods)
- Compliant with NFPA 70E – Current Edition. Meeting the performance specifications of ASTM-F-1506 (On double ply hoods)
- Excellent resistance to welding sparks and splatter – Resists pin-holing from welding sparks and splatter
- Exceptional wear life
- Great Value - Low initial cost, combined with long wear life
- Comfortable - Excellent moisture absorbency – wicks moisture off skin so it can easily evaporate. Fabric also has excellent breathability
- Lightweight – 6 oz. / sq. yd.
- Natural heather gray color – Hides soil
- Fabric - Outer shell and lining are Lenzing FR®, High Strength Para-Aramid, High-Tenacity Nylon- approx. 6 oz. sq yd, 1 x 1 rib knit fabric - knit to allow approx. 130% stretch for maximum stretch and recovery, Calendered to minimize laundry shrinkage
- Stitch Type And Seams - All stitching conforms to Federal Standard 751 Specifications (FED-STD-751), Major seams are flat seam assembled, stitch type 607, Drape attachment to top is done with stitch type 401 and reinforced with stitch type 605., Elastic in face opening is erged in with stitch type 503 and reinforced with bottom cover-stitch, stitch type 406, Binding is applied with bottom cover-stitch, stitch type 406
- Thread - All seams are sewn with 100% Nomex thread size Tex 40.
- Construction - Composed of two layer top and bib, top is seamed from top of face opening to bib in back with a six thread flat seam for comfort. Bib is assembled and joined around circumferece of top with two thread serge and then 5 thread cover-stitched for extra strength, Face opening is circular in shape and serged with x-heavy duty ½"-wide elastic around the perimeter. The elastic is then folded back ½" and cover stitched. The face opening stretches a full 16" (which is 25% more than conventional hoods.) for easy donning and a snug fit around face of SCBA mask. Face opening maintains original shape after repeated launderings, the bottom edge of bib is bound with self-material bias binding and contoured at shoulders allowing the hood to drape on the chest and back for maximum coverage
Features:
- Improved styling for better fit and maximum coverage
- Provides double layer coverage of neck, upper chest, shoulders and shoulder blades
- Tapered back and notched shoulders enable bib to lie flat on front and back
- Flat stitched seams
- X-heavy 1/2" wide elasticized face opening
- Cover stitched bound drape
- Label is sewn down on all four sides for comfort and permanency
- UL Classified to NFPA 1971 - Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting – Current Edition
Specifications:
- Style # 3802093
- Material - Para-Tek FR Tri-Blend Heather Gray
- Arc Rating - 34.4
- HRC Rating - 3
- Design - Double ply hood, with Extra Long Double ply bib, tapered back with notched shoulders
